Sometimes, you should just listen to your wife.
Not too long after Tami and I were married, we came home from church one evening and I began searching the refrigerator for a snack. I finally scrounged up a hard-boiled egg (HBE) and thought I had hit the jackpot. However, the HBE was cold and I figured it would be much better warmed up. This is just the thing that microwave ovens were made for...right?
As I put it on a saucer and started to pop it in the microblaster, Tami stated, with a superior air, "Ray, you're not supposed to put eggs in the microwave." I replied (with a superior air) "That is only raw eggs, in the shell." I proceeded to explain about the yolk being inside the airtight shell and steam pressure building up inside the shell and the explosion that would ensue if you zapped a raw egg. "This cannot happen to an HBE because there is no shell and no liquid" (also said with a superior and knowledgeable air.)
I popped the HBE in the micro, blasted it for a minute or so, popped it out and set the saucer with the HBE on the table. Tami was already sitting at the table eating her cheerios and I sat down to chow down on my HBE. It was just sitting there on the plate...but there was a faint noise...a gentle sssssssssssssssssss... Now that doesn't sound too ominous does it? So...using my second digit (right index finger), I poked down on the HBE.
Have you ever been so totally shocked you couldn't move or scream or....???? With a KA-WHOOM!!! the HBE totally disintegrated on my plate! My finger was still in mid-air over the now-nonexistent HBE. There was HBE on the walls, on the ceiling, on the stove, on the refrigerator, in Tami's hair, it burnt little spots on her face and Yes...there was egg on my face!
And then...silence...We just sat there looking at each other for a few seconds and then both of us just burst out laughing! We cleaned up the mess, I got me some cheerio's and sat down to eat again, with a new appreciation for my new wife and her "superior" culinary knowledge!
Monday, July 6, 2015
Friday, March 6, 2015
Oh My Laig!
Hank and Drover...what would our life have been like without Hank and Drover?...and Slim?...and Little Alfred?...and Wallace & Junior?...and Rip & Snort??? If you are not a diehard fan of "Hank the Cowdog", you have no idea what I'm talking about.
In the early 90's (the 1990's...), Mike and LaDona Blue were our pastors at Junction Hill Pentecostal Church. They traveled quite a bit and they loved to stop at Cracker Barrel. Back then, Cracker Barrel had a deal where you could "rent" audio books at one Cracker Barrel and return them at another one on down the road. They started renting "Hank the Cowdog" on cassette tape and came back home telling us the capers of the "Head of Ranch Security"! Well...we skedaddled on down to the library and rented some for Tabitha...and the rest (as they say) is history. Tabitha (and Mom & Dad) fell in love with the escapades of ole Hank and Drover!
John Erickson, who hails from Perryton, in the Texas Panhandle, wrote these series of books about a ranch dog named Hank and his trusty sidekick, a stub-tailed mutt named Drover. Mr. Erickson proceeded to read his books for audio books and do all of the characters' voices. Hank is the "Yogi Berra" of dogdom. He can mess up the simplest phrases and idioms! Drover is a scaredy cat and is perpetually excusing himself from any work or task by blaming his gimpy leg...hence the phrase "I would do thus and so but....OH MY LAIG!!" Other characters are introduced in the books such as "Pete the Barn Cat", the ranch hand "Slim", the owners of the ranch "High Loper" and "Sally May", the buzzards "Wallace" (Pa) and Junior (Son) and of course the coyotes "Rip" and "Snort"! Mr. Erickson is still writing "Hank" books so if you want to get "edgeakated" in the world of "Hankdom" just go to his site right HERE
The last part of January, we traveled to the Texas Panhandle, the the City of Perryton...to our Nephew's wedding. Bracy Bean and Briana Barton were married in Perryton and John Erickson even helped ole Brace propose! On the way there, I was privileged to pass through the "Mecca of Dogdom", Ochiltree County Texas! This is Hank's stomping grounds and is mentioned many times in his books.
The town of Darrouzett is also mentioned in the stories, although I think the spelling is different.
But the "Holy Ground" of "Dogdom" is a town called "Twitchell". This is where Hank invariably gets into trouble when he rides into town with Slim or High Loper. In the book, it is a full sized town with all kinds of businesses, but as you can see in the pictures below, it's just a wide spot in the road beside the railroad track! And it's spelled different! I know the suit is incongruous with the surroundings but you gotta get the picture when you have the chance!
So...all you "Hank" fans out there...be JEALOUS! I done been there and have the pictures to prove it!
In the early 90's (the 1990's...), Mike and LaDona Blue were our pastors at Junction Hill Pentecostal Church. They traveled quite a bit and they loved to stop at Cracker Barrel. Back then, Cracker Barrel had a deal where you could "rent" audio books at one Cracker Barrel and return them at another one on down the road. They started renting "Hank the Cowdog" on cassette tape and came back home telling us the capers of the "Head of Ranch Security"! Well...we skedaddled on down to the library and rented some for Tabitha...and the rest (as they say) is history. Tabitha (and Mom & Dad) fell in love with the escapades of ole Hank and Drover!
John Erickson, who hails from Perryton, in the Texas Panhandle, wrote these series of books about a ranch dog named Hank and his trusty sidekick, a stub-tailed mutt named Drover. Mr. Erickson proceeded to read his books for audio books and do all of the characters' voices. Hank is the "Yogi Berra" of dogdom. He can mess up the simplest phrases and idioms! Drover is a scaredy cat and is perpetually excusing himself from any work or task by blaming his gimpy leg...hence the phrase "I would do thus and so but....OH MY LAIG!!" Other characters are introduced in the books such as "Pete the Barn Cat", the ranch hand "Slim", the owners of the ranch "High Loper" and "Sally May", the buzzards "Wallace" (Pa) and Junior (Son) and of course the coyotes "Rip" and "Snort"! Mr. Erickson is still writing "Hank" books so if you want to get "edgeakated" in the world of "Hankdom" just go to his site right HERE
The last part of January, we traveled to the Texas Panhandle, the the City of Perryton...to our Nephew's wedding. Bracy Bean and Briana Barton were married in Perryton and John Erickson even helped ole Brace propose! On the way there, I was privileged to pass through the "Mecca of Dogdom", Ochiltree County Texas! This is Hank's stomping grounds and is mentioned many times in his books.
The town of Darrouzett is also mentioned in the stories, although I think the spelling is different.
But the "Holy Ground" of "Dogdom" is a town called "Twitchell". This is where Hank invariably gets into trouble when he rides into town with Slim or High Loper. In the book, it is a full sized town with all kinds of businesses, but as you can see in the pictures below, it's just a wide spot in the road beside the railroad track! And it's spelled different! I know the suit is incongruous with the surroundings but you gotta get the picture when you have the chance!
So...all you "Hank" fans out there...be JEALOUS! I done been there and have the pictures to prove it!
Saturday, January 24, 2015
My Ornery Wife
A post on Facebook reminded Tami of an funny incident that happened years ago. I will relate it here on my blog so every one can have a good chuckle...at my expense...
Mom wanted her new outside thermometer put on an old bird-house post in her back yard...so...on a hot dry, summer day, I commenced with the project. First of all, this was no ordinary thermometer...it was the kind that the NASA astronauts can read from the Space Station. And as such...it required more that just hand tools to mount it to the post. There were no outside plugins so I plugged the extension cord in the house, ran it out the back door and across the yard to the post. I got Mom's electric drill and the attachments I needed. Mom was showing me how and where on the post she wanted the thermometer and I marked the spots for drilling. When I started drilling the holes, the drill worked real good for about five seconds...and then it just quit. I took it down, looked it over, shook it a little, squeezed the trigger and...it worked! Back to drilling and a few seconds later, it quit again. I took it down, Mom and I looked it over, I wiggled the cord, squeezed the trigger and wah-lah!...it worked! Back to drilling...same thing...this time I checked the drill cord to see if it was connected good...and it was...I wiggled the cord some more, tapped the drill on the post (this usually helps) and after all this...it starts working. Back to the drilling! Wouldn't you know it?...after a few seconds, it quit again! I was getting frustrated by this time because it was hot, I was sweating, this was supposed to be a ten-minute job and THE AGGERVATIN' DRILL WASN'T WORKING!!!
About this time, I just happened to glance back toward Mom's house...Did I mention that Tami was with me that day and... Mrs. "Don't Want To Get All Hot And Sweaty" stayed inside in the air conditioning?...where the extension cord was plugged in?......My glance back at the house revealed her at the kitchen window, laughing and giving me a "little kiddie" wave! The reason the drill wouldn't work?...she was unplugging the cottonpickin' cord!! OK...what could we do but laugh with her?! If the roles were reversed, I would have done the same thing!! Mom and I went inside, had a laugh with Tami...and a glass of iced tea...and went and put up the thermometer without any further "interruptions"!
Mom wanted her new outside thermometer put on an old bird-house post in her back yard...so...on a hot dry, summer day, I commenced with the project. First of all, this was no ordinary thermometer...it was the kind that the NASA astronauts can read from the Space Station. And as such...it required more that just hand tools to mount it to the post. There were no outside plugins so I plugged the extension cord in the house, ran it out the back door and across the yard to the post. I got Mom's electric drill and the attachments I needed. Mom was showing me how and where on the post she wanted the thermometer and I marked the spots for drilling. When I started drilling the holes, the drill worked real good for about five seconds...and then it just quit. I took it down, looked it over, shook it a little, squeezed the trigger and...it worked! Back to drilling and a few seconds later, it quit again. I took it down, Mom and I looked it over, I wiggled the cord, squeezed the trigger and wah-lah!...it worked! Back to drilling...same thing...this time I checked the drill cord to see if it was connected good...and it was...I wiggled the cord some more, tapped the drill on the post (this usually helps) and after all this...it starts working. Back to the drilling! Wouldn't you know it?...after a few seconds, it quit again! I was getting frustrated by this time because it was hot, I was sweating, this was supposed to be a ten-minute job and THE AGGERVATIN' DRILL WASN'T WORKING!!!
About this time, I just happened to glance back toward Mom's house...Did I mention that Tami was with me that day and... Mrs. "Don't Want To Get All Hot And Sweaty" stayed inside in the air conditioning?...where the extension cord was plugged in?......My glance back at the house revealed her at the kitchen window, laughing and giving me a "little kiddie" wave! The reason the drill wouldn't work?...she was unplugging the cottonpickin' cord!! OK...what could we do but laugh with her?! If the roles were reversed, I would have done the same thing!! Mom and I went inside, had a laugh with Tami...and a glass of iced tea...and went and put up the thermometer without any further "interruptions"!
Tuesday, January 13, 2015
Brooklyn Pizza
Sometimes I find coolest places to eat. If you read online reviews and take a chance every now and then, you can have some unique dining experiences. I was working recently in Sturgeon, Missouri and had to spend the night in Kingdom City, near Fulton. I read the reviews of Brooklyn Pizza and decided to try it. It is on the northwest corner of courthouse square in Fulton and is relatively small.
There's nothing small about the pizza though! Their only pizza is a 16"! I ordered pepperoni, ham and black olives and it was scrumptious!
And then there was the live music...The band for the night was a Jazz band and since I am basically an eclectic music listener, I just sat back, munched pizza and enjoyed it!
Here is a couple of samples of the music. These dudes were really getting into it and I had a front row seat!
If you ever find yourself in Fulton, in the evening, wanting something different for dinner...Check this place out!
There's nothing small about the pizza though! Their only pizza is a 16"! I ordered pepperoni, ham and black olives and it was scrumptious!
And then there was the live music...The band for the night was a Jazz band and since I am basically an eclectic music listener, I just sat back, munched pizza and enjoyed it!
Here is a couple of samples of the music. These dudes were really getting into it and I had a front row seat!
If you ever find yourself in Fulton, in the evening, wanting something different for dinner...Check this place out!
Friday, January 9, 2015
Ever had the "Thumps"?
On Thursday night, Tami fixed spaghetti for supper and here's the deal. It has to be Ragu sauce with my Mom's secret additives (which includes brown sugar). It was absolutely delicious so...I ate three platefuls! This may or may not have been the reason for the weird dreams I had, but I do know it was responsible for my indigestion. When I sat up on the edge of the bed Friday morning, Tami woke up and asked the usual question "How are you this morning?" This reply just popped into my head..."I think I had the Spaghetti Thumps."
It was a great privilege to grow up in the Ozarks and have the family that I had. Every region and family has their own expressions, phrases, and idioms but I was especially blessed! For some time now, I have been collecting the phrases that my Mom and Dad used. When Dad had a minor discomfort, whether intestinal or otherwise, he would say "I guess I just have the Thumps."
You may not realize it but there is a medical condition called "Thumps". In 1831 it was first diagnosed by a veterinarian...in a horse. We call them hiccups but veterinarians call them "Thumps". I don't think hiccups was what my Dad was referring to.
If you look up the etymology and translations of the word "Thump", things get mighty interesting. It originated in the 1530's with the verb definition "to strike hard" and in the 1550's with the noun definition "a dull, heavy sound." In Danish the word is "Dunk", in Catalan - "Volta", in Hungarian -"Puffanas", in Icelandic - "Thump"... However, in the Swedish dialect the word is "dumpa"...hmmmmm. We may be on to something here!
These are the times I wish I could just call up my Dad and say "Why did you call it the Thumps??" All I know is this - I had the "Thumps" but all is well now since Tami just brought me a warm, homemade, slightly doughy, gingersnap cookie! The "Thumps" are gone!!!
It was a great privilege to grow up in the Ozarks and have the family that I had. Every region and family has their own expressions, phrases, and idioms but I was especially blessed! For some time now, I have been collecting the phrases that my Mom and Dad used. When Dad had a minor discomfort, whether intestinal or otherwise, he would say "I guess I just have the Thumps."
You may not realize it but there is a medical condition called "Thumps". In 1831 it was first diagnosed by a veterinarian...in a horse. We call them hiccups but veterinarians call them "Thumps". I don't think hiccups was what my Dad was referring to.
If you look up the etymology and translations of the word "Thump", things get mighty interesting. It originated in the 1530's with the verb definition "to strike hard" and in the 1550's with the noun definition "a dull, heavy sound." In Danish the word is "Dunk", in Catalan - "Volta", in Hungarian -"Puffanas", in Icelandic - "Thump"... However, in the Swedish dialect the word is "dumpa"...hmmmmm. We may be on to something here!
These are the times I wish I could just call up my Dad and say "Why did you call it the Thumps??" All I know is this - I had the "Thumps" but all is well now since Tami just brought me a warm, homemade, slightly doughy, gingersnap cookie! The "Thumps" are gone!!!
Thursday, January 1, 2015
The Corner Post
The corner post stands on the north of the road,
Stained with the passage of time.
It is strange to mull over, consider and ponder,
That the hands that helped form it were mine.
In 1969 we moved to the Conklin house just north of the Junction Hill Church. Dad had also bought what we called "The Six Acres" just west of the church and across the dirt road. As I recall, there was no fence or a very poor fence around "The Six Acres", where the roads were, on the east and south sides. For some reason or other, Dad abandoned the normal process of large wooden corner posts and decided to put in large concrete corner posts. To be more precise and technical, these were ginormous, colossal, honkin' big, monstrositous corner posts. And here's the "skinny" on how they were put in.
Dad built some forms out of corrugated steel pipes or as he called them..."Whistles". These are the pipes that you put in a road ditch and cover with gravel so you can drive across it and the water in the ditch goes through the pipe. He took a piece of the pipe about six foot long and fourteen inches in diameter and cut it in half lengthwise. Then he bolted angle iron to the edges of each piece where he could put the pipe back together by bolting the angle irons on each piece together. We would set the form over a post hole that was slightly bigger than the pipe in diameter and about three to four feet deep. I'm not sure how Dad braced the pipe to keep it from falling in the hole but he did and then leveled it where the post would be straight.
The post hole?...Yes....the post hole. How do you dig a post hole? Dad started with a spud bar. Now some people, I have learned, call it a crow bar, a pry bar or even a punch bar but I'll just stick with spud bar since I'm spinnin' this yarn. It was a solid steel bar, usually five to six feet long with the handle end about an inch diameter and the business end a couple of inches in diameter and I'd say it weighed in at twelve to fifteen pounds. The business end had a chisel point and you used it to break up the dirt (and rocks...and more rocks.....and even more rocks) so they could be dipped out with the post hole diggers (affectionately called PHD's).
The PHD's had two handles that were attached by a hinge to curved metal blades that kinda had the appearance of crawdad pinchers (that's crayfish for all y'all north of the Mason/Dixon). You squeezed the handles together, which held the pinchers apart and jammed them into dirt and rocks that were broken up with the spud bar. Then, you pulled the handles apart (which squeezed the dirt in the pinchers), lifted the dirt "load" out of the post hole and set it where you wanted to pile the dirt, squeezed the handles back together, the dirt fell out on the pile and you went back for another "load"! I know this is real complicated for some of y'all but try to stay with me here... After you got all the dirt out that you could with the PHD's, you stepped back and let the "Spudder" spud for awhile, then used the PHD's, then the spud bar, then the PHD's until you got the post hole big and deep enough.
After the pipe form was set over the post hole and braced, it was time for the concrete. I asked Ralph about this but he didn't remember either..."Did we mix the concrete to fill the posts? I did some ciphering and come up with a half to three-quarters of a yard of concrete per post. Now this was doable with a portable mixer but it seems like I remember Dad having two sets of forms and if he did, a concrete truck would make a trip for that much concrete.
After the concrete set up, we pulled the forms off and you had a concrete post, in the shape of the pipe that was solid in the ground!
We didn't put anything in the concrete to tie fencing to, so the barb wire was just wrapped around the post and stretched to the next corner post or line brace.
If my memory serves me right, Dad put in at least seven of these concrete posts around "The Six Acres". Now Folks!...that weren't no small task!
If you drive west, past the Junction Hill Church, through the crossroad, about two or three hundred feet past, you'll see the corner post pictured above on the right or north side of the road. If you take a right at the crossroad, go up the little hill, there will be a couple of these corner posts on your left or west.
Stained with the passage of time.
It is strange to mull over, consider and ponder,
That the hands that helped form it were mine.
In 1969 we moved to the Conklin house just north of the Junction Hill Church. Dad had also bought what we called "The Six Acres" just west of the church and across the dirt road. As I recall, there was no fence or a very poor fence around "The Six Acres", where the roads were, on the east and south sides. For some reason or other, Dad abandoned the normal process of large wooden corner posts and decided to put in large concrete corner posts. To be more precise and technical, these were ginormous, colossal, honkin' big, monstrositous corner posts. And here's the "skinny" on how they were put in.
Dad built some forms out of corrugated steel pipes or as he called them..."Whistles". These are the pipes that you put in a road ditch and cover with gravel so you can drive across it and the water in the ditch goes through the pipe. He took a piece of the pipe about six foot long and fourteen inches in diameter and cut it in half lengthwise. Then he bolted angle iron to the edges of each piece where he could put the pipe back together by bolting the angle irons on each piece together. We would set the form over a post hole that was slightly bigger than the pipe in diameter and about three to four feet deep. I'm not sure how Dad braced the pipe to keep it from falling in the hole but he did and then leveled it where the post would be straight.
The post hole?...Yes....the post hole. How do you dig a post hole? Dad started with a spud bar. Now some people, I have learned, call it a crow bar, a pry bar or even a punch bar but I'll just stick with spud bar since I'm spinnin' this yarn. It was a solid steel bar, usually five to six feet long with the handle end about an inch diameter and the business end a couple of inches in diameter and I'd say it weighed in at twelve to fifteen pounds. The business end had a chisel point and you used it to break up the dirt (and rocks...and more rocks.....and even more rocks) so they could be dipped out with the post hole diggers (affectionately called PHD's).
The PHD's had two handles that were attached by a hinge to curved metal blades that kinda had the appearance of crawdad pinchers (that's crayfish for all y'all north of the Mason/Dixon). You squeezed the handles together, which held the pinchers apart and jammed them into dirt and rocks that were broken up with the spud bar. Then, you pulled the handles apart (which squeezed the dirt in the pinchers), lifted the dirt "load" out of the post hole and set it where you wanted to pile the dirt, squeezed the handles back together, the dirt fell out on the pile and you went back for another "load"! I know this is real complicated for some of y'all but try to stay with me here... After you got all the dirt out that you could with the PHD's, you stepped back and let the "Spudder" spud for awhile, then used the PHD's, then the spud bar, then the PHD's until you got the post hole big and deep enough.
After the pipe form was set over the post hole and braced, it was time for the concrete. I asked Ralph about this but he didn't remember either..."Did we mix the concrete to fill the posts? I did some ciphering and come up with a half to three-quarters of a yard of concrete per post. Now this was doable with a portable mixer but it seems like I remember Dad having two sets of forms and if he did, a concrete truck would make a trip for that much concrete.
After the concrete set up, we pulled the forms off and you had a concrete post, in the shape of the pipe that was solid in the ground!
We didn't put anything in the concrete to tie fencing to, so the barb wire was just wrapped around the post and stretched to the next corner post or line brace.
If my memory serves me right, Dad put in at least seven of these concrete posts around "The Six Acres". Now Folks!...that weren't no small task!
If you drive west, past the Junction Hill Church, through the crossroad, about two or three hundred feet past, you'll see the corner post pictured above on the right or north side of the road. If you take a right at the crossroad, go up the little hill, there will be a couple of these corner posts on your left or west.
Wednesday, December 24, 2014
A "Traditional" Christmas Eve?
Christmas Eve... Traditions that we never thought would change... People we expected to always be there... A naivety of how good the times really were... And a complete ignorance of the burdens of life our parents and grandparents were under...
We never thought that Christmas Eve could or would be spent at any other place other than at Momo and Popo Riggs'. To think otherwise was sacrilege. Momo would always have fudge, divinity candy, mincemeat pie, turkey and dressing, homemade gifts for the grand kids, yards of cloth for the daughters and daughter-in-laws... Popo would always be sitting in the midst of the chaos but not quite as unperturbed as Momo. Playing Monopoly in the den or just sitting around talking and listening...Surely this would never change...but it did. I figure eighty-three would have been the last year. Momo passed in eighty-four and I don't remember any Christmas' on West Main Street after that.
A couple of years after Mom moved to town, from the Homeplace in eighty-seven, Tami and I started a new tradition. On Christmas Eve, we packed up and went to spend the night at Mom's house on 6th Street. This must have started after Tabitha was old enough to sleep with Mom. We would drive around on Christmas Eve night and look at all the lights. Mom would get up early on Christmas Day and fix a light breakfast and prepare for the Riggs' Christmas later in the day. This tradition continued until O-five, the last Christmas Mom was with us.
This year, we have a new focus...No traditions yet but they will come. Our first Grandchild, Lucas Rey Miller, was born yesterday so he is the center of attention.
However, in all of the traditions, the gifts, the food and families...Let us not forget that Christmas is about a child sent to "Save Us"...The Christ Child...
In the words of the old carol "Angels From The Realms Of Glory"....
"Sages! Leave your contemplations...Brighter visions beam afar!"
"Seek the great Desire of Nations!...ye have seen His natal star"
"Come and Worship! Come and Worship!"
"Worship Christ the newborn king!"
We never thought that Christmas Eve could or would be spent at any other place other than at Momo and Popo Riggs'. To think otherwise was sacrilege. Momo would always have fudge, divinity candy, mincemeat pie, turkey and dressing, homemade gifts for the grand kids, yards of cloth for the daughters and daughter-in-laws... Popo would always be sitting in the midst of the chaos but not quite as unperturbed as Momo. Playing Monopoly in the den or just sitting around talking and listening...Surely this would never change...but it did. I figure eighty-three would have been the last year. Momo passed in eighty-four and I don't remember any Christmas' on West Main Street after that.
![]() |
| Judging from Kimberly's age in picture below, I think this was Christmas Eve 1979 |
![]() |
| Christmas Eve 1979 |
![]() |
| Christmas Eve 1980 (Again...Judging Kimberly's age) |
![]() |
| Christmas Eve 1980 |
This year, we have a new focus...No traditions yet but they will come. Our first Grandchild, Lucas Rey Miller, was born yesterday so he is the center of attention.
However, in all of the traditions, the gifts, the food and families...Let us not forget that Christmas is about a child sent to "Save Us"...The Christ Child...
In the words of the old carol "Angels From The Realms Of Glory"....
"Sages! Leave your contemplations...Brighter visions beam afar!"
"Seek the great Desire of Nations!...ye have seen His natal star"
"Come and Worship! Come and Worship!"
"Worship Christ the newborn king!"
Subscribe to:
Posts (Atom)

















